21 CFR 110.35: Sanitary operations
Requires food plants to keep facilities and equipment clean and in repair, use safe cleaning chemicals with controlled toxic material storage, exclude pests, and clean and sanitize food-contact surfaces to prevent contamination.
Part 110, Current Good Manufacturing Practice in Manufacturing, Packing, or Holding Human Food · Subpart B, Buildings and Facilities
How FDA words it
The opening lines investigators use most when they cite 110.35, from the 483s we hold.
Effective measures are not being taken to exclude pests from the processing areas and protect against the contamination of food on the premises by pests.Most used
Effective measures are not being taken to protect against the contamination of food on the premises by pests.110.35(c)
Failure to maintain buildings, fixtures, or other physical facilities in a sanitary condition.110.35(a)
Recent 483s citing 110.35
- Chamberlain Farms Inc. · Owensville, IndianaDuring the inspection! observed, indications of poor sanitary practices… Aug 14, 2020
- Vulto Creamery LLC · Walton, New YorkThe procedure used for cleaning and sanitizing of equipment and utensils has not… Mar 22, 2017
- SM Fish Corp. · Far Rockaway, New YorkFailure to conduct cleaning and sanitizing operations for utensils and equipment in… Sep 9, 2016
- Abbott Nutrition · Sturgis, MichiganEffective measures aye not being taken to exclude pests from the processing areas… Jul 11, 2015
- Blue Bell Creameries, L.P. · Brenham, TexasThe procedure used for cleaning and sanitizing ofequipment has not been shown to… May 1, 2015
The regulation text
§ 110.35 Sanitary operations.
(a)General maintenance. Buildings, fixtures, and other physical facilities of the plant shall be maintained in a sanitary condition and shall be kept in repair sufficient to prevent food from becoming adulterated within the meaning of the act. Cleaning and sanitizing of utensils and equipment shall be conducted in a manner that protects against contamination of food, food-contact surfaces, or food-packaging materials.
(b)Substances used in cleaning and sanitizing; storage of toxic materials. (1) Cleaning compounds and sanitizing agents used in cleaning and sanitizing procedures shall be free from undesirable microorganisms and shall be safe and adequate under the conditions of use. Compliance with this requirement may be verified by any effective means including purchase of these substances under a supplier's guarantee or certification, or examination of these substances for contamination. Only the following toxic materials may be used or stored in a plant where food is processed or exposed:
(i)Those required to maintain clean and sanitary conditions;
(ii)Those necessary for use in laboratory testing procedures;
(iii)Those necessary for plant and equipment maintenance and operation; and
(iv)Those necessary for use in the plant's operations.
(2)Toxic cleaning compounds, sanitizing agents, and pesticide chemicals shall be identified, held, and stored in a manner that protects against contamination of food, food-contact surfaces, or food-packaging materials. All relevant regulations promulgated by other Federal, State, and local government agencies for the application, use, or holding of these products should be followed.
(c)Pest control. No pests shall be allowed in any area of a food plant. Guard or guide dogs may be allowed in some areas of a plant if the presence of the dogs is unlikely to result in contamination of food, food-contact surfaces, or food-packaging materials. Effective measures shall be taken to exclude pests from the processing areas and to protect against the contamination of food on the premises by pests. The use of insecticides or rodenticides is permitted only under precautions and restrictions that will protect against the contamination of food, food-contact surfaces, and food-packaging materials.
(d)Sanitation of food-contact surfaces. All food-contact surfaces, including utensils and food-contact surfaces of equipment, shall be cleaned as frequently as necessary to protect against contamination of food.
(1)Food-contact surfaces used for manufacturing or holding low-moisture food shall be in a dry, sanitary condition at the time of use. When the surfaces are wet-cleaned, they shall, when necessary, be sanitized and thoroughly dried before subsequent use.
(2)In wet processing, when cleaning is necessary to protect against the introduction of microorganisms into food, all food-contact surfaces shall be cleaned and sanitized before use and after any interruption during which the food-contact surfaces may have become contaminated. Where equipment and utensils are used in a continuous production operation, the utensils and food-contact surfaces of the equipment shall be cleaned and sanitized as necessary.
(3)Non-food-contact surfaces of equipment used in the operation of food plants should be cleaned as frequently as necessary to protect against contamination of food.
(4)Single-service articles (such as utensils intended for one-time use, paper cups, and paper towels) should be stored in appropriate containers and shall be handled, dispensed, used, and disposed of in a manner that protects against contamination of food or food-contact surfaces.
(5)Sanitizing agents shall be adequate and safe under conditions of use. Any facility, procedure, or machine is acceptable for cleaning and sanitizing equipment and utensils if it is established that the facility, procedure, or machine will routinely render equipment and utensils clean and provide adequate cleaning and sanitizing treatment.
(e)Storage and handling of cleaned portable equipment and utensils. Cleaned and sanitized portable equipment with food-contact surfaces and utensils should be stored in a location and manner that protects food-contact surfaces from contamination.
[51 FR 22475, June 19, 1986, as amended at 54 FR 24892, June 12, 1989]
Questions
What does 21 CFR 110.35 require?
Requires food plants to keep facilities and equipment clean and in repair, use safe cleaning chemicals with controlled toxic material storage, exclude pests, and clean and sanitize food-contact surfaces to prevent contamination.
How do FDA investigators word a 110.35 observation?
The most common opening is: “Effective measures are not being taken to exclude pests from the processing areas and protect against the contamination of food on the premises by pests.”
Which sections are cited alongside 110.35?
In the same 483s, investigators most often also cite 110.20 (Plant and grounds), 110.80 (Processes and controls), 110.10 (Personnel), 110.40 (Equipment and utensils).